Share

YELLOW series preamps have been specially developed to offer musicians and sound engineers flexible solutions that meet a range of performing and recording requirements. The preamps combine CLASS-A electronics with a modern, sophisticated design and lightweight yet robust aluminum housing. Every single section has been engineered to ensure maximum potential from any kind of sound source.

YELLOW BLENDER offers 2 dedicated inputs (one balanced XLR for microphones and one unbalanced Jack for instruments). The Return socket can also be used as a third input for line sources. A choice of four balanced / unbalanced output options enables connection to active loudspeakers, mixers, recording devices and effects. A separate headphone output is also provided. The two input channels include 4-band EQ, notch filter, phase reverse, low-pass “warmth” filter, low cut switch and phantom power (24V and 10V). The Send/Return sockets also enable an effect loop.

Main Features:
Modern, sophisticated design, built in a robust and light aluminum case.
Thre input channels (maximum) for all kind of microphones and pickups
Four output lines (maximum) with multiple connections
Headphone output
Send & Return for effect loop
Four band EQ for the two main channels to ensure a wide range of tonal controls
Hi-end pure class A electronics for the best possible sound performance

Weight 0.4 kg (0.88lb)
Dimensions 20x10x3.8cm (7.87×4.25×1.49 in)
Frequency Response 10 Hz to 25 kHz (+/- 3dB)
Construction Anodized aluminium box
Mic Input MIC IN: XLR balanced
Sensitivity: -56 dB
Impedance: 4.7 Kohm
LINE/INSTRUMENT input LINE IN: 1/4″ Jack
Sensitivity: -52 dB
Impedance: 3 Kohm with 10V on
Impedance: 200 Kohm with 10V off
RETURN/LINE input 1/4″ stereo balanced Jack
Sensitivity: -30 dB
impedance 22 Kohm
EQ 4 band EQ + adjustable notch filter
warm and low cut
MASTER OUTPUTS XLR balanced, output level +20 dBu
Impedance 100 ohm
1/4″ Jack unbalanced, output level +14 dBu
Impedance 100 ohm
DI output XLR balanced, sensitivity +5 dBu
Impedance 100 ohm
SEND output XLR balanced, sensitivity +5 dBu
Impedance 100 ohm
Headphone High class headphone preamplifier
1/8″ Jack, sensitivity +10 dBu
Impedance 10 ohm
Supply 24VDC 210 mA regulated power supply